• Enhanced motor gives the M18FID3 0 – 4,400 IPM and 226 Nm of Max Torque
• Provides the user the ability to deliver power to more demanding applications back-to-back
• Enhanced motor delivers an improved 3,900 RPM when compared to previous generations
• Provides the user with increased range of speed to complete application fast and with minimal downtime
• Redesigned trigger mechanism with improved fitment and smoother acceleration
• Tri-LED lighting illuminating the area of work while eliminating shadows
• 4-Mode Drive Control provides users with greater control over the output speed and power

Specifications

• Chuck Type: 1/4″ Hex
• Max Torque: 226 Nm
• RPM: 0 – 1,700 / 3,000 / 3,900 / 3,900
• IPM: 0 – 1,400 / 3,600 / 4,400 / 4,400
• DRIVE CONTROL: 4 – Mode
• Single Hand Bit Insertion: Yes
• Tri-LED: Yes

Includes

• 1 x 18V FUEL 1/4″ Hex Impact Driver 2953-20
• 1 x Bit Holder
• 1 x Belt Clip

(No batteries or charger included)

All trademarks are used for descriptive purposes only. The names of other companies, products, brands, or model numbers may be trademarks of their respective owners. National Power Tools Pty Ltd make no claims of sponsorship, affiliations or endorsement of its products by any other company.

The post BRAND NEW MILWAUKEE BRUSHLESS M18 IMPACT DRIVER GEN 4 2953-20 (M18FID3-0) appeared first on National Power Tools.

• High torque impact driver
• 5 Modes (Max, Bolt, Bolt Single, Soft, Self Drilling)
• IP56 dust & water resistance
• Triple Hammer for high efficiency
• 3 LED light provides more visibility in dark and compact areas

Specifications:

• • Voltage: 36V
  • Drive: 6.35mm (1/4″)
  • LED Light: White
  • Capacity (Diameter):
    • Small Tapping/Wood Screws (<3mm Diameter): 4mm-10mm (5/32″ to 3/8″)
    • Ordinary Bolt: 5mm-18mm (3/16″ to 23/32″)
    • High Tension Bolt: 5mm-14mm (3/16″ to 9/16″
    • Self Drilling Screw: 3.5mm-6mm (1/8″ to 1/4″)
  • Tightening Torque:
    • Power Mode: 215Nm
    • Bolt Mode: 215Nm
    • Soft Mode: 76Nm
  • No-Load Speed:
    • Power Mode: 0-3400 min-¹
    • Bolt Mode: 0-2900 min-¹
    • Bolt Single Mode: 0-2900 min-¹
    • Soft Mode: 0-900 min-¹
    • Self Drilling Screw Mode: 0-3700 min-¹
  • Impact Rate:
    • Power Mode: 0-4100 min-¹
    • Bolt Mode: 0-4100 min-¹
    • Bolt Single Mode: 0-4100 min-¹
    • Soft Mode: 0-2000 min-¹
    • Self Drilling Screw Mode: 0-2200 min-¹
  • Dimensions (L x H): 114mm x 241mm
  • Weight: 1.6kg 

    Includes:

    Brand New Brushless Hikoki Impact Driver WH36DC 36V
    Belt Clip

    (No batteries or charger included)

The post NEW HIKOKI BRUSHLESS IMPACT DRIVER WH36DC 36V appeared first on National Power Tools.

• Up to 609Nm breakaway torque (406Nm of fastening torque) ensures removal of the tightest bolts
• Ultra compact, light weight design allows for use in confined areas
• Square drive with hog ring allows quick socket changes
• Hole in anvil allows securing of sockets with a retaining pin/rubber O-ring
• Variable trigger allows complete control over all applications
• Efficient brushless motor delivers high performance and extends tool life
• Bright white LED with delay feature for improved visibility and functionality
• Now with brightness control so you can dim or turn off the light to suit the environment
• Comfortable rubber XR grip and switch for greater application comfort and maximum control

Specifications:

• Voltage: 18V
• Anvil Size: 1/2″
• Impact Rate: 3600ipm
• Break-Away Torque: 610Nm
• Fastening Torque: 406Nm
• Socket: Hog Ring
• Overall Length: 125mm
• Weight (Skin): 1.1kg

Can be used with 18v and also Flex volt batteries.

Includes:

Dewalt 1/2″  Brushless Impact Wrench DCF921N
Belt Clip
Instruction Booklet

(No batteries or chargers included)

The post NEW DEWALT DCF921N COMPACT IMPACT WRENCH 1/2″ 18V appeared first on National Power Tools.

• Up to 609 breakaway torque (406Nm of fastening torque) ensures removal of the tightest bolts
• Ultra compact, light weight design allows for use in confined areas
• Square drive with hog ring allows quick socket changes
• Hole in anvil allows securing of sockets with a retaining pin/rubber O-ring
• Variable trigger allows complete control over all applications
• Efficient brushless motor delivers high performance and extends tool life
• Bright white LED with delay feature for improved visibility and functionality
• Now with brightness control so you can dim or turn off the light to suit the environment
• Comfortable rubber XR grip and switch for greater application comfort and maximum control

Specifications:

• Voltage: 18V
• Anvil Size: 1/2″
• Impact Rate: 3600ipm
• Break-Away Torque: 610Nm
• Fastening Torque: 406Nm
• Socket: Hog Ring
• Overall Length: 125mm
• Weight (Skin): 1.1kg

Cane be used with 18v and also Flex volt batteries.

Includes:

Dewalt 1/2″  Brushless Impact Wrench DCF921
Belt Clip
Instruction Booklet

(No batteries or chargers included)

The post NEW DEWALT DCF921 COMPACT IMPACT WRENCH 1/2″ 18V/20V appeared first on National Power Tools.

Features:

• 3-mode led with spotlight mode for a 20 minute shutoff function allowing for extended work time in dark or confined spaces
• The DCD998 Hammer Drill has 3-speeds, high performance, all-metal transmission to optimize tool-to-task for fast application speeds and improved run-time for drilling in masonry materials
• TOOL FREE CHUCK – Full metal with carbide inserts for increased grip strength
• LED WORK LIGHT – 3 modes including 20 minute torch feature
• IMPROVED SIDE HANDLE – More control and safety in high demand applications
• 3 SPEED TRANSMISSION – All metal construction for increased durability
• BRUSHLESS MOTOR – For long runtime and tool life

Specifications:

• Voltage: 18 / 54 V
• Max Torque: 120 Nm
• Max Drilling Capacity – Wood: 13 mm
• Max Drilling Capacity – Metal: 13 mm
• Max Drilling Capacity – Masonry: 13 mm
• No Load Speed – Drill: 0 – 450 / 1300 / 2000 rpm
• No Load Speed – Hammer: 0 – 500 / 1500 / 2250 rpm
• Beats per minute: 0 – 8,500 / 25,500 / 38,250 bpm

Includes:

Brand New Dewalt Brushless Hammer Drill Driver DCD998
Side Handle
Belt Clip
Instructions Booklet

(No batteries or charger included)

The post NEW DEWALT BRUSHLESS HAMMER DRILL DRIVER DCD998 XR POWER DETECT 18V appeared first on National Power Tools.

The DEWALT DCF911 is ideal for tackling most fastening applications. This Impact Wrench features up to 339 Nm. of MAX torque and 542 Nm of MAX breakaway torque. The DCF911 features a brushless motor for overall efficiency and optimum run time.  Light weight, compact and comfortable. Anvil resistant to shearing and breakage. Efficient motor design allows for optimum runtime Increased visibility with LED.

Cane be used with 18v and also Flex volt batteries.

SPECIFICATIONS

Voltage  18V/20V
Drive Size  1/2″
Anvil Type  Hog Ring
No Load Speed  0-2,850 Rpm
Impacts/Min  0-3,250 Ipm
Max Tightening Torque 339 Nm
Max Breakaway Torque 542 nm
Weight   1.1 Kgs
Length  140 mm

INCLUDES

Dewalt 1/2″  Brushless Impact Wrench DCF911
Belt Clip
Instruction Booklet

(No batteries or chargers included)

The post BRAND NEW DEWALT DCF911 COMPACT IMPACT WRENCH 1/2″ 18V appeared first on National Power Tools.

The DEWALT DCF897 is ideal for tackling most fastening applications. This Impact Wrench features up to 950 Nm. of MAX torque and 1626 Nm of MAX breakaway torque. The DCF897 features a brushless motor for overall efficiency and optimum run time. Premium performance for fastening and breakaway Fastening torque of 950 Nm and breakaway torque of 1626 Nm. Light weight, compact and comfortable Anvil resistant to shearing and breakage Efficient motor design allows for optimum runtime Increased visibility with LED Additional control for different applications with speed settings

Cane be used with 18v and also Flex volt batteries.

SPECIFICATIONS

Voltage  18
Drive Size  3/4″
Anvil Type  Hog Ring
No Load Speed  0-400/1200/1900
Impacts/Min  0-2,400ipm
Max Tightening Torque 950 Nm
Max Breakaway Torque  1626 Nm
Weight   2.65 Kgs
Length  235 mm

INCLUDES

Dewalt Hi-Torque Brushless Impact Wrench DCF897
Instruction Booklet

(No batteries or chargers included)

The post BRAND NEW DEWALT HI TORQUE IMPACT WRENCH DCF897 18V 3/4″ appeared first on National Power Tools.

• Compact and easy to use
• Powerful Tightening Torque of 175Nm
• Works well at low speeds
• Highly responsive trigger switch
• Compatible with the HiKOKI MultiVolt and 18V slide batteries

  Specifications:

• Voltage: 18V
• Motor Type: Brushless
• Switch type: Variable Speed Trigger Switch with Forward/Reverse Changeover Lever
• Drive: 1/4″ (6.35mm) Bit Holder
• Capacity:
• Small screw: 4 – 8 mm
• Ordinary bolt: 5 – 16 mm
• High-tension bolt: 5 – 12 mm
• Maximum tightening torque: 175 Nm
• No-load speed: 0 – 3,100 rpm
• Impact rate: 0 – 3,400 ipm
• Light: Yes – White LED
• Dimensions (L x H): 120mm x 241mm

  Includes:

  Brand New Brushless Hikoki Impact Driver WH18DE
  Belt Clip

  No batteries or charger included

The post NEW HIKOKI BRUSHLESS IMPACT DRIVER WH18DE 18V appeared first on National Power Tools.

Powerful 460 MWO, 3700 rpm motor delivers power and speed to make the most demanding cuts with ease

140MM ” 30T carbide tipped metal cutting blade quickly and cleanly cuts a variety of metallic construction materials

Bright LED Light with 20 second delay after trigger release provides enhanced visibility of material and cut line

SIGHT-LINE Window provides for a clear view of the material

High strength steel shoe offers durability and resistance against chip build up

Optimized rubber overmolded comfort grip delivers optimal balance and control

Accepts all 18 volt and 20 volt Dewalt slide batteries. (Not post type)

SPECIFICATIONS

Voltage 18V / 20V MAX*
Height – 191mm
Width – 89 mm
Length – 364 mm
Weight – 3.1 Kgs
Arbour Size – 20mm
Blade Dia – 140mm (5 1/2″)
Depth Of Cut at 90 Deg – 40 mm
No Load Speed – 3,700 Rpm

INCLUDES

Brand New Dewalt Cordless Metal Cutting Saw 18V/20V XR DCS373
Blade
Instruction Booklet

(No batteries or charger included)

The post BRAND NEW DEWALT METAL CUTTING SAW DCS373 18V / 20V appeared first on National Power Tools.

Features & Benefits

• 16mm Wall To Screw Center (15mm without shoe) – Reduced Head Width
  • Enables user better access to drive screws in corners, reducing frustration & likelihood of unseated screws
• 360 Degree Collator – Collator can be angled so strip isn’t in the way
  • Use can angle mechanism so it is not interfering with their work, leading to less frustration & increase productivity
• Easy Depth Adjustment – Ensures screw are constantly set to the correct depth
  • Increased productivity due to consistent screw driving depth, no need to rework screws
• Enhanced dust management – Less dust enters mechanism
  • Unit less prone to jamming leading to increased productivity
• Redesigned Screw Driver Bit – Improved bit life
  • Less wear on bit, reduces user frustration & improves productivity due to less down time
• Reduced Weight – Ergonomic
  • Less user fatigue improves productivity
• Tool Free Attachment & Removal of Collator – Collator can be easily attached & removed when necessary
  • Faster change over between standard screwgun & collated means less downtime & increase productivity

INCLUDES

Brand New Dewalt Drywall Screwgun Attchment DCF6202
Instruction Booklet.

(No batteries or charger included)

The post DEWALT CORDLESS DRYWALL COLLATED SCREWGUN DCF6202 ATTACHMENT appeared first on National Power Tools.